Automate hardware
validation.
Autonomous agents validate your real electronics hardware, grounded in your design context, bound by limits you define. Made for teams building hardware faster than they can validate it.
Hilstart agent · 00:00:41.2
Powering the board, checking its idle draw… 0.058 A. Pass.
Test limit 0.10 A, approved by you
Your best engineers
spend weeks
on validation.
Manually probing circuits. Configuring oscilloscopes. Holding 4 probes simultaneously... Repeated for every single revision.
With Hilstart, validation runs itself. Upload your design. Agents write the tests. Run against your hardware. Every trace captured.
70 of 70checks passed
Seventy checks in four groups: power-up, rails, motor and CAN bus. First power waits for you. The run is kept, with its result and the agents’ summary of what failed and what to change.
Pass
Run historyevery run kept
We build what connects
to your board.
Tracer
Our network-connected hardware interface: power, I/O and buses in one box, working alongside your instruments.
Fixtures and
harnesses
A bed-of-nails fixture that reaches your board’s pins, or a harness for its connectors, built for it and delivered with it.
Start validation the moment
your hardware arrives.
5 V coil current
load 0 → 100 mA
12 boards settled
to ±2% in 0.15 ms